|
|
Airpura T600 Air Purifier - Tobacco Tars and Chemicals
|
|
Manufacturer: Airpura
Manufacturer Part No: T600
Product Options
| |
|
Airpura T600
An excellent choice for dedicated smoking areas, homes, bars, public spaces and restaurants.
The Airpura T600 is specially designed for tobacco smoke, odor and chemical control. It's TarBarrier pre-filter combined with a deep carbon bed, removes 4000 chemicals and gases found in tobacco smoke.
Gases removed, include but not limited to:
Benzene
Toulene
Formaldehyde
and at least 60 carcinogens! Tars are emitted from air stream
Large carbon bed
The Airpura T600 features a 26 lb 3 inch deep activated carbon bed to adsorb the 4000 harmful and arcinogenic chemicals and gases found in tobacco smoke TarBarrier filter Special filter designed to trap the tars in tobacco smoke
Powerful motor/fan
560 CFM (rated) can recycle the air in up to 2000 sq ft in approximately 30 minutes to keep refreshing the air and remove harmful smoke and odors
Wall brackets
(Optional) Wall brackets are available to mount the unit in an elevated position. (High on a wall or column)
Effective for up to 2000 feet
FEATURES
All metal housing ensures no plastic vapors are emitted
Motor out of the air flow. Most air purifiers blow the clean air over the motor and pick up impurities
Pressure sealed filter chamber prevents leakage of polluted air around filters
Electrical parts in a sealed chamber out of the airflow. Increases safety and prevents off-gassing
Felt gaskets seal the filter chamber. Maximize filtration with no rubber off-gassing found with other filters
Clean modern appearance fits in any decor
Low noise level (at 6 feet) 28.1db on low 62.3db on high (560 cfm)
Unimpeded airflow simple and direct internal airflow avoids the air turbulence, inefficiency and noise associated with more convoluted systems
Technical Specifications
26 lbs activated carbon, size: 13" x 13" x 7.5"
Carbon Bed: 3" deep x 570 sq'' surface
Tar Removal: (Special Tar-Barrier Filter) 570 sq in x 1 in deep
Particle Suppression: Post particle filter 306 sq in
Air Flow: 560 cfm (More CFM than any other compact unit available)
Housing: Powder Coated Steel
Size: 23" X 15"
Weight: 49 lbs
Voltage Options: 115 or 220 volts
Watts: 120 on high, 40 on low
Sound level: 28.1 db on low (at 6 feet), 62.3 db on high (Room level 25.1 db)
ETL Certified: Conforms to CSA C22.2 no 113, ANSI / UL 507
Filter Life
Carbon filters should be changed at least every 3 months in public areas
TarBarriers need to be changed at least every 4 weeks in public areas
HEPA Barrier filters should be changed at the same time as the carbon filter. For private home use change intervals will usually be less frequent
Warranty:
If within five (5) years from the date of the original purchase by the end-user from the Authorized Dealer, an Airpura R600, C600, T600, H600, V600 or UV600 (with the exception of filters or UV lamps) is proved to be defective by reason only of faulty workmanship or materials, Airpura Industries Inc. Will, at their option, repair or replace the part or product free of charge for labor and materials.
If within ten (10) years from the date of the original purchase by the end-user from the Authorized Dealer, an Airpura R600, V600 or UV600 (with the exception of filters or UV lamps) is proved to be defective by reason only of faulty workmanship or materials, Airpura Industries Inc. will at their option repair or replace the part or product free of charge for labor only. Any replacement parts deemed necessary by Airpura Industries will be charged to the purchaser.
Obvious defects must be communicated to the Authorized Dealer within 10 days from the purchase date.
This warranty shall not apply to damage caused through misuse, wear and tear, neglect, unauthorized repair or to damage caused through installation, adaptation, modification or use in an improper manner or inconsistent with Airpura's operating and maintenance instructions, wear or deterioration due to environmental conditions or to damage occurred during transit.
Airpura Industries will not be liable under this warranty for any fault or damage arising from defective workmanship, if the product has been serviced, repaired or modified by any person other than Airpura Industries Inc. or the manufacturer's serial label has been removed or tampered with.
All products returned for service or repair must be accompanied with a RA (Return Authorization) number. The RA number must be clearly visible on the external packaging. The absence of an RA number will delay the service or repair process, for any shipment to Airpura Industries Inc. not accompanied with a RA number will not be accepted or will be immediately sent back to the shipper. Please contact Airpura Industries Inc to receive a RA number prior to shipment. |
|
|
|